Multiple horizontal lifting steel plate lifting pliers are generally used for large-area steel plate lifting, once a fall accident occurs, the coverage of the loss is also quite large, so we must pay attention to the use of horizontal lifting steel plate lifting pliers, stable use, to ensure the smooth development of work.

　　1, before the use of horizontal lifting steel plate pliers to understand the approximate weight of the steel plate, and whether the thickness of the steel plate is consistent with the width of the opening of the clamp, only these conditions are within the rated range, can be used in the next step.

　　2, carefully check each steel plate pliers, there are no defective products, such as cracks, self-locking failure, thread worn out. These are all dangers.

　　3. The action position of multiple horizontal lifting steel plate pliers is evenly distributed, and the steel plate pliers act evenly around the balance point position of the steel plate, and try not to let the steel plate tilt seriously during the lifting process.

　　4, each action on the lifting chain and the balance point of the Angle within 60 degrees, once more than 60 degrees will increase the burden of the lifting chain, while increasing the possibility of chain break.

　　The above is the precautions for the joint use of multiple transverse steel plate hangers.

Next: Lifting tongs are very important lifting gear

Previous: What are the characteristics of the steel plate hoist more attention? Attention should also be paid to the maintenance of newly purchased steel plate pliers